TROY Group MAN-EXT2000 - Manual (Page 217)

Using Services B-1
Appendix B
Using Services (lpd-Plus)
Overview
A service is a resource that can be accessed by computers
that wish to print the print server. TROY XCD external print
servers provide the following predefined services (do a
SHOW
SERVICE command in the print server remote console to get a
list of available services; note that the serial port services
will only be displayed if the serial port has been enabled for
printing; the XConnect 100 will also display additional
similar services for the second parallel and serial ports):
Service Definition
XCD_xxxxxx_P1 Parallel port binary service
BINARY_P1 Parallel port binary service
TEXT_P1_TX Parallel port TCP/IP text service (adds
carriage return after each line feed)
POSTSCRIPT_P1 Parallel port PostScript service
(switches PJL-compatible printer to
PostScript mode)
PCL_P1 Parallel port PCL service (switches
PJL-compatible printer to PCL mode)
XCD_xxxxxx_P1_AT Parallel port AppleTalk service
XCD_xxxxxx_S1 Serial port binary service
BINARY_S1 Serial port binary service
TEXT_S1 Serial port TCP/IP text service (adds
carriage return after each line feed)
POSTSCRIPT_S1 Serial port PostScript service
(switches PJL-compatible printer to
PostScript mode)
PCL_S1 Serial port PCL service (switches
PJL-compatible printer to PCL mode)
XCD_xxxxxx_S1_AT Serial port AppleTalk service