TROY Group MAN-EXT2000 - Manual (Page 76)

5-4 Novell Network Configuration
print queue that the TROY XCD print server can service.
Users send their print requests to the file server’s print
queue, and the jobs are then spooled (either directly, or in the
case or remote printer mode, via an intermediate print server)
to the TROY XCD print server.
TROY XCD print servers can be configured under Windows
using Hewlett-Packard's JetAdmin utility or TROY XCD's
XAdmin32 and XAdmin utilities. Alternatively, they can be
configured using the NetWare PCONSOLE utility in
conjunction with TROY XCD's DOS XCONFIG utility.
Important Note: Not all TROY XCD print server models
support queue server mode with Novell Directory Services
(refer to chapter 2 for protocol support information). You
must enable bindery emulation in order to use queue server
mode with these products.
Before You Begin
Before you can configure a NetWare print queue, you must
have sufficient privileges. With NetWare 3.xx and earlier,
you MUST be logged in as SUPERVISOR (not someone with
Supervisor privileges). With NetWare 4.xx and later, make
sure that you have sufficient administrator privileges to
create a print queue in the desired context.
Default Print Server Names (Service
Names)
TROY XCD print servers automatically make themselves
known on a NetWare network. Each print server port has an
associated default NetWare name; these names are used