TROY Group MAN-EXT2000 - Manual (Page 205)

Command Summary A-3
TELNET. To connect to the print server using TELNET on
UNIX, Windows NT, or most other TCP/IP systems, type:
TELNET ipaddress
at the UNIX system prompt, where ipaddress is the IP
address of the print server. When you are connected, push
RETURN or ENTER to get the "
# " prompt, enter the
password ACCESS (it will not print), and type anything in
response to the Enter Username> prompt. When you get
the Local> prompt, you are ready to enter commands.
XCONFIG. To connect to the print server using the TROY
XCD XCONFIG NetWare utility, insert the TROY XCD
Print Server Software diskette in Drive A and type:
A:XCONFIG
at the DOS system prompt. If you have only one print
server, you will be immediately connected. If you have more
than one print server, you will be given a list of available
print servers. Type the number of the print server to which
you want to connect. When you are connected, When you
are connected, enter the password
ACCESS (it will not print)
at the " # " prompt, and type anything in response to the Enter
Username> prompt. When you get the Local> prompt, you
are ready to enter commands.
GENERAL SERVER COMMANDS
CLear FAtal
Deletes fatal error log
CLear PAssword
Remove console password