TROY Group MAN-EXT2000 - Manual (Page 173)

PrintraNet Internet Printing 13-15
via the POP3 server. If this does not work, there may be an
E-mail configuration problem on the PC, on the local E-mail
server, or on the remote POP3 server. Double check to make
sure that the E-mail parameters that you configured on the
PC and on the remote print server match those that are
configured on the E-mail servers.
If you can print small files OK but are having trouble
printing large files, the problem may be in the E-mail system.
Some E-Mail systems have difficulties printing files that are
larger than about 400KB in length. To verify this, try
sending the large file as an attachment to an E-mail message.
If the file does not reach its destination intact, then the
problem is with the E-Mail system.
If you get an SMTP error when using a WINSOCK
connection, you may need to configure the hosts file on your
Windows 95/98/NT system. To do this create a file named
HOSTS in the \WINDOWS\SYSTEM directory (or edit this
file if it already exists) and add an entry for your mail server
similar to the following using the DOS editor (substitute the
actual IP address and name of your SMTP mail server):
192.189.207.222 mail.troyxcd.com
If you require additional support, contact TROY XCD
Technical support at (949) 399-0820, FAX: (949) 399-0825,
E-mail: [email protected].
Print Server Console Command
Summary
The following PrintraNet-related configuration and status
commands are available from the TROY XCD print server