TROY Group MAN-EXT2000 - Manual (Page 40)

3-4 Management Methods
- The list of unconfigured print servers will again be
displayed. Click on Close to return to the main
screen.
- The print server should show up on the main
XAdmin32 screen (the default name will be
XCD_xxxxxx, where "xxxxxx" is the last six digits of
the Ethernet address). If the print server does not
appear on the main screen, click on the Search
button to find new print servers.
4. To configure a print server, double click on its name
and enter the password (
ACCESS is the default
password). A series of "index cards" will be
displayed. Each of these "cards" represents a protocol
or other configurable item. Click on the appropriate
tab to configure the item.
TROY XCD WebXAdmin
WebXAdmin allows the user to configure the print server
with a standard web browser like Netscape Navigator or
Microsoft Internet Explorer. It can therefore be used on any
operating system that supports web browser capabilities. To
use WebXAdmin, you must first make sure that you have a
web browser installed on your computer and that you have
configured an IP address in both the computer and the print
server (refer to the previous XAdmin section if you do not
know how to put an IP address in the print server). Also
make sure that you have configured your TCP/IP stack to
communicate over the local area network (rather than via a
PPP dial-up connection).
To use WebXAdmin, start your web browser and enter the IP
address of the print server as the destination web site. Once