TROY Group MAN-EXT2000 - Manual (Page 153)

Banyan VINES Installation 12-5
10. If desired, enter the user names who are authorized to
use the printer when you get the Access Lists screen.
Otherwise, press F10 to accept the defaults.
11. If you have a VINES 5.xx system, you may optionally
enter the users to be notified in the event of printer
problems when you get the Alert list screen.
Otherwise, press F10 to accept the defaults (not
applicable for VINES 6.xx).
12. When you get the Add A Destination screen, use the
arrow keys to select PCPrint and press ENTER.
IMPORTANT NOTE: If the PCPrint option is not
installed, PCPrint will not appear on this screen. You
must have PCPrint installed in order to use a TROY
XCD print server.
13. When you get the Destination Attributes screen, enter
the StreetTalk name of the TROY XCD print server
(from step A-3) and an optional description. Press F10.
14. You will get the Output strings menu. This screen
allows you to define strings of characters that can be
sent before and after the print job to put the printer in a
particular state (for example, duplex mode). The
default values work OK for most applications.
However, if you are printing text files directly from the
DOS prompt, you should define a Post-job string such
as
\f (formfeed) to insure that the paper is ejected
(this is generally not needed with DOS or Windows
application programs, since the program or drivers
reset the printer after each job, and it may cause
problems with binary graphics files). Press F10 to
accept the output string values.