TROY Group MAN-EXT2000 - Manual (Page 171)

PrintraNet Internet Printing 13-13
1. When you get the "Local>" prompt after connecting to
the console, enter the command
SET POP3 ADDRESS ipaddres s
where ipaddress is the IP address of your POP3 server
(consult with your network administrator if you do not
know this address).
2. Enter the commands:
SET POP3 NAME mailboxname
SET POP3 PASSWORD emailpassword
where mailboxname is the name of the remote TROY
XCD print server mailbox and emailpassword is the
password associated with this mailbox. Usually the
mailbox name is the same as the first part of the E-mail
address that you defined previously (for example, if the
E-mail address is [email protected], then the
mailbox name is emailprinter.
3. The print server is set by default to poll the POP3 server
every 30 seconds. If you wish to change this value, enter
the command:
SET POP3 POLLING rate
where rate is the polling rate in seconds.
4. If you have enabled notification, enter the command:
SET SMTP ADDRESS ipaddress