TROY Group MAN-EXT2000 - Manual (Page 165)

PrintraNet Internet Printing 13-7
• Service Name: Enter the service name on the remote
TROY XCD print server that you wish to use for
printing. This is normally BINARY_P1 for the first
parallel port, BINARY_S1 for the serial port,
BINARY_P2 for the second parallel port, or
BINARY_S2 for the second serial port. If you do not
know the service name, you may leave this field
blank and the default binary service will be used.
Refer to Appendix B of the appropriate TROY XCD
print server Administrator's Guide for information on
how to use services.
• Your E-Mail Address: If you are using MAPI, skip
this step. If you are using WINSOCK, enter your E-
mail address (for example, [email protected]).
• SMTP E-Mail Server: If you are using MAPI, skip
this step. If you are using WINSOCK, enter the IP
address of your SMTP E-mail server (consult your
network administrator if you do not know this
address).
• Select Desired Notification: You may optionally
have the remote TROY XCD print server notify you
when the job is complete or when the job fails or both
when the job is complete and if it fails. Select the
desired option and then enter the E-mail address
where you want the notification sent (generally you
would want the notification sent to your own E-mail
address).
• Press OK to continue.