Paradyne 4200 User Manual
Page 81
3. ADSL Facility Commands
4200-A2-GB20-00
August 2002
3-45
Table 3-36. RTRV-PROFILE-ADSLDN Response Parameters
Parameter Explanation
tid Target
NE
identification
yy-mm-dd
Year, month, and day
hh:mm:ss
Hour, minute, and second
M
Message generated in response to an input command
c
If provided, ctag; otherwise 0
COMPLD Completed
DENY
Input command is denied
/* */
Enclosed are human readable comments – unspecified format
adsl_profile_id
As described for command parameters (see
RTRV-PROFILE-ADSLDN Command Parameters
), except that ALL is
not used.
profile_scope
As described for command parameters (see
RTRV-PROFILE-ADSLDN Command Parameters
).
profile_name
A string of up to 32 characters that uniquely identifies the profile within
its scope.
[adslprof_nblk]
ADSL parameter block containing one or more of the following named
parameters (separated by commas):
PFBR: Planned fast channel bit rate in kilobits per second (32
−
2176).
MAXFBR: Maximum fast-channel bit rate in kilobits per second
(32
−
2176).
MINFBR: Minimum fast-channel bit rate in kilobits per second (32).
MAXNMR: Maximum additional noise margin (16 dB).
MINNMR: Minimum additional noise margin (0 dB).
RAMODE: Rate adaptive mode. The valid values is AT_RUN
(automatically selected at run time).
TNMR: Target noise margin (3
−
14 dB).
If not specified, the values of these parameters remain unchanged.
errcde Error
code