Response format – Paradyne 4200 User Manual
Page 202
10. Fault Commands
10-10
August 2002
4200-A2-GB20-00
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-ALM-EQPT:[tid]:aid_eqpts:[ctag]::[ntfncde]
,,[srveff] */
"aid_eqpts[,aid_type]:ntfncde,cond_eqpt,serveff,,,[locn],
[dirn],:[cond_descr]"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-ALM-EQPT:[tid]:aid_eqpt:[ctag]::[ntfncde],,
[srveff] */
errcde
;
Table 10-6.
RTRV-ALM-EQPT Response Parameters (1 of 2)
Parameter Explanation
tid Target
NE
identification
yy-mm-dd
Year, month, and day
hh:mm:ss
Hour, minute, and second
M
Message generated in response to an input command
c
If provided, ctag; otherwise 0
COMPLD Completed
DENY
Input command is denied
/* */
Enclosed are human readable comments – unspecified format
errcde Error
code
aid_eqpts
As described for command parameters (see
RTRV-ALM-EQPT Command Parameters
), except that ALL is not used.
[aid_type]
The type of Access Identifier. The value is ADSL.
ntfncde
As described for command parameters (see
RTRV-ALM-EQPT Command Parameters
), except that ALL is not used.