Paradyne 4200 - Manual (Page 75)

3. ADSL Facility Commands
4200-A2-GB20-00 August 2002 3-39
Example
Retrieve the near-end errored seconds (fast channel) count above 5187 on ADSL
rack 1, shelf 1, slot 1, circuit 9 for a 15-minute period beginning at 6:30 a.m. on
June 10.
RTRV-PM-ADSL:TAMPA:ADSL-1-1-1-9:42::::;
TAMPA 02-07-03 12:30:43
M 42 COMPLD
/*
RTRV-PM-ADSL:TAMPA:ADSL-1-1-1-9:42:::ES-F,5187-UP,NEND,,15-M
IN,06-10,6-30: */
"ADSL-1-1-1-9:ES-F,2015,,NEND,,15-MIN,06-10,6-30"
;
Related Commands
ED-ADSL on page 3-10
/* */ Enclosed are human readable comments – unspecified format
aid_adsl As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ), except that ALL is not used.
[aid_type] Type of AID. The value is ADSL.
monadsl As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ), except that ALL is not used.
monval Measured value for the monitored parameter (0
−
4294967295).
[locn] As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ).
[tmper] As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ).
[mondat] As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ), except that ALL is not used.
[montm] As described for command parameters (see Table 3-29,
RTRV-PM-ADSL Command Parameters ), except that ALL is not used.
errcde Error code (see Appendix A, Error Codes )
Table 3-30. RTRV-PM-ADSL Response Parameters (2 of 2)
Parameter Explanation