Paradyne 4200 - Manual (Page 186)

9. Performance Commands
9-6 August 2002 4200-A2-GB20-00
Example
Report downstream operations parameters for ADSL-1-1-1-3.
REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42;
TAMPA 01-10-24 12:30:43
M 42 COMPLD
/* REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42 */
"ADSL-1-1-1-3:RELCAP,70"
"ADSL-1-1-1-3:NMR,3"
"ADSL-1-1-1-3:PWR,8"
"ADSL-1-1-1-3:ATEN,4"
"ADSL-1-1-1-3:CELLSF,1000"
;
Related Commands
REPT-OPSTAT-ADSLUP on page 9-7
Table 9-4. REPT-OPSTAT-ADSLDN Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aid_adsl As described for command parameters (see Table 9-3,
REPT-OPSTAT-ADSLDN Command Parameters ).
op_adsl ADSL operational parameter. Values are:
ATEN: Signal attenuation (0
−
60 dB)
CELLSF: Rolling count of cells transmitted downstream on Fast channel
CURFBR: Current Fast channel bit rate (32
−
2176 QOSCLASSF:
Quality of Service for the ADSL Fast channel. The supported option is
UBR (Unspecified bit rate). UBR is the default.
NMR: Noise margin (0
−
31 dB)
PWR: Transmitted signal power n (0
−
20 dB)
RELCAP: Relative capacity operation. Configured bit rate as a
percentage of the current bit rate (0
−
100)
value Value of parameter specified by op_adsl