Paradyne 4200 - Manual (Page 209)

10. Fault Commands
4200-A2-GB20-00 August 2002 10-17
Example
Retrieve major attributes for all ADSL facilities.
RTRV-ATTR-ADSL:TAMPA:ADSL:42::MJ;
TAMPA 02-04-20 10:30:23
M 42 COMPLD
/* RTRV-ATTR-ADSL:TAMPA:ADSL:42::MJ */
"ADSL,ADSL:MJ,LOS,NEND,RCV"
;
Related Commands
None
Table 10-10. RTRV-ATTR-ADSL Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aidall_adsl As described for command parameters (see Table 10-9,
RTRV-ATTR-ADSL Command Parameters ), except that ALL is not used.
aid_type The type of Access Identifier. The value is ADSL.
ntfncde As described for command parameters (see Table 10-9,
RTRV-ATTR-ADSL Command Parameters ), except that ALL is not used.
cond_adsl As described for command parameters (see Table 10-9,
RTRV-ATTR-ADSL Command Parameters ), except that ALL is not used.
[locn] Location of the condition. Valid values are:
NEND: Near End
FEND: Far End
[dirn] Direction of the condition. Valid values are:
RCV: Receive
TRMT: Transmit