Paradyne 4200 - Manual (Page 78)

3. ADSL Facility Commands
3-42 August 2002 4200-A2-GB20-00
RTRV-PROFILE-ADSLALM
The RTRV-PROFILE-ADSLALM command retrieves information about ADSL
alarm configuration profiles.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag]
[::,profile_scope] */
adsl_profile_id:profile_name,profile_scope, profile_state
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag]
[::,profile_scope] */
aid:ERRCDE=errcde
/* error description */
;
Table 3-33. RTRV-PROFILE-ADSLALM Command Parameters
RTRV-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][::,profil
e_scope];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
adsl_profile_id ADSL profile index (1
−
30). Grouping and ranging are allowed. ALL may
be used.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
[profile_scope] Scope of the profile. The valid value is LOCAL (local to this stack only).
If no value is specified, this parameter is ignored (all values are
reported).