Paradyne 4200 - Manual (Page 215)

10. Fault Commands
4200-A2-GB20-00 August 2002 10-23
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-ATTR-EQPT:[tid]:aidall_eqpt:[ctag]::[ntfncde],
[cond_eqpt] */
"equip_type,aid_type:ntfncde,cond_eqpt"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-ATTR-EQPT:[tid]:aidall_eqpt:[ctag]::[ntfncde],
[cond_eqpt] */
errcde
;
Table 10-14. RTRV-ATTR-EQPT Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
equip_type As described for command parameters (see Table 10-13,
RTRV-ATTR-EQPT Command Parameters ).
aid_type The type of Access Identifier. The value is EQPT.
ntfncde As described for command parameters (see Table 10-13,
RTRV-ATTR-EQPT Command Parameters ), except that ALL is not
used.
cond_eqpt As described for command parameters (see Table 10-13,
RTRV-ATTR-EQPT Command Parameters ).