Paradyne 4200 - Manual (Page 70)

3. ADSL Facility Commands
3-34 August 2002 4200-A2-GB20-00
Example
Retrieve ADSL configuration for data rack 1, shelf 1, slot 1, circuit 9.
RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42::::;
TAMPA 02-03-24 12:30:43
M 42 COMPLD
/* RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42:::: */
"ADSL-1-1-1-9:ADSLPROF=4,QOSCLASSF=UBR,:IS"
;
Related Commands
DLT-PROFILE-ADSL on page 3-6
ED-ADSL on page 3-10
ED-PROFILE-ADSLDN on page 3-14
ED-PROFILE-ADSLUP on page 3-19
ENT-PROFILE-ADSL on page 3-24
RTRV-PROFILE-ADSL on page 3-40
RTRV-PROFILE-ADSLDN on page 3-44
RTRV-PROFILE-ADSLUP on page 3-50
adsl_nblk
(continued)
MXTXPWRDN: Specifies the maximum transmission power settings for
the ATU-C. The maximum transmit power range may be limited
according to local guidelines when spectrum management is enabled.
The values (configurable in 1 dB increments) supported are: +12 to
−
14 dB (default is +12 dB)
MXTXPWRUP: Specifies the maximum transmission power settings for
the ATU-R. The maximum transmit power range may be limited
according to local guidelines when spectrum management is enabled.
The values (configurable in 1 dB increments) supported are +12 to
−
14 dB (default is +12 dB)
state State from the Bellcore state model. Values are:
IS-NR: In service, normal
OOS-AU: Out of service, autonomous
OOS-MA: Out of service, management (transitory state, changes to
OOS-AUMA)
OOS-AUMA: Out of service, management and autonomous
[sst] As described for command parameters (see Table 3-25, RTRV-ADSL
Command Parameters ).
errcde Error code (see Appendix A, Error Codes )
Table 3-26. RTRV-ADSL Response Parameters (2 of 2)
Parameter Explanation