Paradyne 4200 - Manual (Page 19)

4200-A2-GB20-00 August 2002 xvii
About This Guide
Document Purpose and Intended Audience
This guide contains information necessary for the use of the GranDSLAM 4200
ATM Stackable DSLAM.
The successful user of this manual has some experience with the installation and
configuration of DSL network devices, and Transaction Language No. (TL1)
commands.
Document Summary
Section Description
Chapter 1, Introduction to the
Hotwire 4200 GranDSLAM
Provides an introduction to the capabilities of the Hotwire
4200 GranDSLAM.
Chapter 2, Using the
Command Line Interface
Explains how to use the Command Line Interface (CLI).
Chapter 3, ADSL Facility
Commands
Contains commands for configuring and viewing the
ADSL facility.
Chapter 4, DS1 Facility
Commands
Contains commands for configuring and viewing the DS1
facility.
Chapter 5, ATM Commands Contains commands for configuring and viewing the ATM
interface.
Chapter 6, Cross Connect
Commands
Contains commands for configuring and viewing cross
connections.
Chapter 8, IP Access
Commands
Contains commands for configuring and viewing the
Internet Protocol (IP) port.
Chapter 7, Equipment
Commands
Contains commands for configuring and viewing
information concerning equipment in the network.
Chapter 9, Performance
Commands
Contains commands for viewing network reports.
Chapter 10, Fault Commands Contains commands for retrieving network fault
information.