Paradyne 4200 User Manual
Page 212
10. Fault Commands
10-20
August 2002
4200-A2-GB20-00
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-ATTR-ALL:[tid]:aid_all:[ctag]::[ntfncde],
[cond_all] */
errcde
;
Table 10-12. RTRV-ATTR-ALL Response Parameters
Parameter Explanation
tid Target
NE
identification
yy-mm-dd
Year, month, and day
hh:mm:ss
Hour, minute, and second
M
Message generated in response to an input command
c
If provided, ctag; otherwise 0
COMPLD Completed
DENY
Input command is denied
/* */
Enclosed are human readable comments – unspecified format
errcde Error
code
aid
Access Identifier associated with the alarm. Valid values are:
ADSL: All ADSL equipment
EQPT: All equipment
T1: All DS1 facilities
aid_type
The type of Access Identifier. Valid values are ADSL, EQPT, and T1.
ntfncde
As described for command parameters (see
RTRV-ATTR-ALL Command Parameters
), except that ALL is not used.
cond
As described for command parameters (see
RTRV-ATTR-ALL Command Parameters
), except that ALL is not used.
[locn]
Location of the condition. Valid values are:
NEND: Near End
FEND: Far End
[dirn]
Signal direction. Valid values are:
RCV: Receive
TRMT: Transmit