Paradyne 4200 - Manual (Page 232)

10. Fault Commands
10-40 August 2002 4200-A2-GB20-00
Example
Retrieve current conditions for NTT1 facility.
RTRV-COND-T1:TAMPA:NTT1:42::,;
TAMPA 02-04-20 10:30:23
M 42 COMPLD
/* RTRV-COND-T1:TAMPA:NTT1:42::, */
"NTT1-1,T1:CR,LOS,SA,,,NEND,,,Loss of Signal/Clock"
;
Related Commands
None
ntfncde Notification code. Valid values are:
CR: Critical alarm
MJ: Major alarm
MN: Minor alarm
NA: Not alarmed (reported via REPORT EVENT)
NR: Not reported (information is stored in the NE)
cond_ds1 As described for command parameters (see Table 10-23,
RTRV-COND-T1 Command Parameters ), except ALL is not used.
[locn] Location of the condition. Valid values are:
NEND: Near End
FEND: Far End
serveff Service effect. Valid values are:
SA: Service affecting
NSA: Not service affecting
[dirn] As described for command parameters (see Table 10-23,
RTRV-COND-T1 Command Parameters ), except ALL is not used.
Table 10-24. RTRV-COND-T1 Response Parameters (2 of 2)
Parameter Explanation