Paradyne 4200 - Manual (Page 281)

14. System Commands
4200-A2-GB20-00 August 2002 14-19
RTRV-META-AID
The RTRV-META-AID command retrieves the Access Identification (AID) of a
specific command or the AIDs of all TL1 commands.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-META-AID:[tid]:[aid]:[ctag]; */
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-META-AID:[tid]:[aid]:[ctag]; */
aid:ERRCDE=errcde
/* error description */
;
Table 14-18. RTRV-META-AID Command Parameters
RTRV-META-AID:[tid]:[aid]:[ctag][:];
RESTRICTION: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
aid The AID value. Valid values are:
– NULL: Retrieve aids of all commands
– command name: Retrieve aid of that specific command.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.