Paradyne 4200 - Manual (Page 339)

C. Traps and MIBs
4200-A2-GB20-00 August 2002 C-15
ATM Interface Traffic Descriptor Group (RFC 2515)
The ATM virtual link tables use this ATM Traffic Descriptor table to assign traffic
parameters and service category to the receive and trnsmit directions of the ATM
virtual links (VPLs and VCLs). The only object is atmServiceCategory
(atmTrafficDescrParamEntry 10). The only valid values for this object are cbr(2)
(Constant Bit Rate), rtVbr(3) (Real-Time Variable Bit Rate), nrtVbr(4)
(NonReal-Time Variable Bit Rate), and ubr(6) (Unspecified Bit Rate).
atmInterfaceMyNeighborIfName
(atmInterfaceConf Entry
12)
The value of this object contains
textual name of the the interface on
the neighbor system connected to
the far end of this interface. Read-only. Valid values are:
T ATM1
−
24 interface: Corresponding the
value of atmfPortMyIfName through ILMI
interaction with the neighbor system.
T ATM90 interface: zero-length string
T ATM91 interface: zero-length string
atmInterfaceCurrentMaxVpiBits
(atmInterfaceConf Entry
13)
The maximum number of VPI bits
that can currenly be used at this
ATM interface. Valid values are:
T ATM1
−
24 interface: 4
T ATM90 interface: 5
T ATM91 interface: 0
atmInterfaceCurrentMaxVciBits
(atmInterfaceConf Entry
14)
The maximum number of VCI bits
that can currenly be used at this
ATM interface. Valid values are:
T ATM1
−
24 interface: Actual (default is 8)
T ATM90 interface: 6
T ATM91 interface: 8
atmInterfaceSubscrAddress
(atmInterfaceConf Entry
15)
The identifier assigned by a service
provider to the network side of the
public UNI. The only valid value is zero.
Table C-6. ATM Interface Configuration MIB Group Objects (2 of 2)
Object Description Setting/Contents