Paradyne 4200 - Manual (Page 79)

3. ADSL Facility Commands
4200-A2-GB20-00 August 2002 3-43
Example
Retrieve alarm profile 5.
RTRV-PROFILE-ADSLALM:TAMPA:5:42;
TAMPA 02-07-24 12:30:43
M 42 COMPLD
/* RTRV-PROFILE-ADSLALM:TAMPA:5:42 */
5:LOCAL:TAMPA101:CONFIG
;
Related Commands
ACT-PROFILE-ADSLALM on page 3-4
DLT-PROFILE-ADSLALM on page 3-8
ED-PROFILE-ADSLDNALM on page 3-16
ED-PROFILE-ADSLUPALM on page 3-21
ENT-PROFILE-ADSLALM on page 3-26
RTRV-PROFILE-ADSLALM on page 3-42
Table 3-34. RTRV-PROFILE-ADSLALM Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
adsl_profile_id As described for command parameters, except that ALL is not used
profile_name Name (32 characters maximum) that uniquely identifies the profile
within its scope
profile_scope As described for command parameters
profile_state State of the profile (ADSL alarm profiles only). Values are:
CONFIG: Profile is currently being created. It can be configured, but not
used.
ACTIVE: Profile has been activated and is ready for use and is
configured.
errcde Error code (see Appendix A, Error Codes )