Paradyne 4200 User Manual
Page 364
C. Traps and MIBs
C-40
August 2002
4200-A2-GB20-00
pdnSyslogSeverityThreshold
Specifies the minimum severity level that
syslog messages can be sent.
Valid values are:
T
emergency(0): System is
unusable
T
alert(1): Action must be taken
immediately
T
critical(2): Critical conditions
T
error(3): Error conditions
T
warning(4): Warning conditions
T
notice(5): Normal, but significant
condition
T
info(6): Informational messages
T
debug(7): Debug-level
messages
pdnSyslogRemoteDaemon
Enables or disables syslog messages going
to a remote daemon.
Valid values are:
T
Disable(1)
T
Enable(2)
pdnSyslogNumber
A sequentially increasing index of syslog
messages starting at 1. The index is reset to
1upon device reset or when the table is
cleared (using pdnSyslogClearTable).
Integer.
pdnSyslogMessage
The text of the syslog message.
Octet string.
pdnSyslogNumOfMsgInTable
Specifies the number of syslog messages
currently in the syslog table.
Integer.
pdnSyslogMaxTableSize
The maximum number of syslog messages
the syslog table can hold.
Integer.
pdnSyslogClearTable
Clears all the entries in the syslog message
table.
Valid values are:
T
noOp(1)
T
clear(2)
pdnSyslogMsgToConsole
Allows messages to be sent to the device’s
console port. For debugging only.
Valid values are:
T
Disable(1)
T
Enable(2)
pdnSyslogRateLimiting
Enables or disables rate limit timing.
Valid values are:
T
Disable(1)
T
Enable(2)
Table C-17. Paradyne Syslog MIB Objects (2 of 2)
Object
Description
Setting/Contents