Paradyne 4200 - Manual (Page 35)

2. Using the Command Line Interface
4200-A2-GB20-00 August 2002 2-9
Add to the list of equipped
units in the network ENT-EQPT:[tid]:aid_eqpt:[ctag]::eqpt_type:
[eqpt_nblk]:[pst];
View a list of existing ATM
Access profiles RTRV-PROFILE-ATMACC:[tid]:atmacc_profile_id:
[ctag]::,[profile_scope];
Apply a profile to an
ADSL port ED-ADSL:[tid]:aid_adsl:[ctag]:::[adsl_nblk]:[
pst];
Create an ATM traffic
descriptor profile ENT-PROFILE-TRAFDSC:[tid]:trafdscprofile_id:[
ctag]::profile_name,,trafdsc_type:[trafdsc_nb
lk];
Create an additional
ADSL line profile different
from the default profile ENT-PROFILE-ADSL:[tid]:[adsl_profile_id]:
[ctag]::profile_name,,[latency];
Configure downstream
transmission parameters
for any additional ADSL
line profiles created ED-PROFILE-ADSLDN:[tid]:adsl_profile_id:
[ctag]:::[adslprof_nblk];
Configure upstream
transmission parameters
for any additional ADSL
line profiles created ED-PROFILE-ADSLUP:[tid]:adsl_profile_id:
[ctag]:::[adslprof_nblk];
Activate the ADSL line
profiles created ACT-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag]
[:]
Create a Virtual Channel
Link (VCL) endpoint for
the GranDSLAM 4200 ENT-VCL:[tid]:aid_vci:[ctag]::rcv_trafdsc,xmt
_trafdsc;
Connect VCL endpoints ENT-CRS-VC:[tid]:nt_vci,lt_vci:[ctag]::::
[pst];
Table 2-2. GranDSLAM 4200 Configuration Commands
To . . . Enter this command . . .