Paradyne 4200 - Manual (Page 362)

C. Traps and MIBs
C-38 August 2002 4200-A2-GB20-00
Paradyne Security MIB (pdn_Security.mib)
The Paradyne Security MIB (pdn_Security.mib) enables an SNMP manager to
control the security aspects of the unit. The objects listed in
Table C-16, Paradyne
Security MIB Objects , are supported.
sysDevConfigUserAccount
Index An index of the Device Configuration
User Accounts table. Integer.
sysDevConfigUserAccount
UserId The login ID of the user account. Display string.
sysDevConfigUserAccount
PrivilegedPassword The password of the user account. T If the user is is configured with this
password in addition to User Password,
then the user is an Administrator. If the
user is an Operator and does not supply
this password upon user configuration,
this value is NULL.
sysDevConfigUserAccountU
serPassword The password of the user account. Display string.
sysDevConfigUserAccountR
owStatus Used to add or delete a row from the
table. Read only.
Table C-15. Paradyne DSLAM System MIB Objects (3 of 3)
Object Description Setting/Contents
Table C-16. Paradyne Security MIB Objects (1 of 2)
Object Description Setting/Contents
devSecurityMgrValidation Enables or disables SNMP source IP
validation. Integer. The default is disable
(1).
devSecurityMgrMaxNumber The maximum number of managers allowed in
the devSecurityMgrTable. Read only. Integer.
devSecurityMgrCurrentNumber The current number of managers allowed in
the devSecurityMgrTable. Read only. Integer.
newSecurityMgrIpAddress Specifies the IP address that identifies the
SNMP manager(s) authorized to send SNMP
messages. IP address. Assumed to be
255.255.255.255 when not
available.
newSecurityMgrAccess Specifies the access allowed for an authorized
NMS when manager validation is performed. Valid values are:
T read(1)
T readwrite(2)
T noAccess(3)
T telnetNoAccess(4)
T telnetRead(5)
T telnetReadWrite(6)
newSecurityMgrSubnetMask Specifies the subnet mask. IP address.