Paradyne 4200 - Manual (Page 38)

3. ADSL Facility Commands
3-2 August 2002 4200-A2-GB20-00
ACT-PROFILE-ADSL
The ACT-PROFILE-ADSL command activates newly created ADSL profiles. See
ENT-PROFILE-ADSL on page 3-24 for information on how to create a new ADSL
profile.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* ACT-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][:] */
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* ACT-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][:] */
errcde
;
Table 3-1. ACT-PROFILE-ADSL Command Parameters
ACT-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined. After a profile is
activated, its parameters cannot be edited.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
adsl_profile_id Numeric identifier of a profile (1
−
30). Grouping and ranging are allowed.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.