Paradyne 4200 - Manual (Page 224)

10. Fault Commands
10-32 August 2002 4200-A2-GB20-00
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/*
RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn],[dirn]
*/
"aid,[aid_type]:ntfncde,cond,[serveff],,,[locn],[dirn],,
[cond_descr]"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/*
RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn],[dirn]
*/
errcde
;
[dirn] Direction of the condition. Valid values (for conditions supporting
direction):
RCV: Receive
TRMT: Transmit
If no value is specified, ALL is assumed.
Table 10-19. RTRV-COND-ALL Command Parameters (2 of 2)
RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn],
[dirn];
Table 10-20. RTRV-COND-ALL Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed