Paradyne 4200 - Manual (Page 231)

10. Fault Commands
4200-A2-GB20-00 August 2002 10-39
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-COND-T1:[tid]:aid_ds1:[ctag]::[cond_dsl1],[locn],
[dirn] */
"aid_ds1,[aid_type]:ntfncde,cond_ds1,serveff,,,[locn],[dirn]
,,[cond_descr]"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-COND-T1:[tid]:aid_ds1:[ctag]::[cond_ds1], [locn],
*/
errcde
/* error description */
;
Table 10-24. RTRV-COND-T1 Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aid_ds1 As described for command parameters (see Table 10-23,
RTRV-COND-T1 Command Parameters ).
aid_type The type of Access Identifier. The value is T1.