10 configuring modules, 1 assigning module ids, 10 configuring modules -29 – Honeywell INTELLIKNIGHT 5820XL User Manual
Page 69: 1 assigning module ids -29, 5860 (see section 4.10.1), Ee section 4.10.1.), 5824. see section 4.10.1, Onfiguring modules
Control Panel Installation
151209
4-29
4.10
C
onfiguring Modules
This section describes how to configure any system hardware modules that have
been added to the system.
4.10.1 Assigning Module IDs
When installing a hardware module (such as, 5815XL, 5824, 5860, 5895XL, 5865-3
or 5865-4), you must use the DIP switches on the module to assign an ID# to the
module.
Figure 4-28 shows all possible DIP switch positions and their correlation to a
numerical ID. For example, to select ID 2, place DIP switch 2 in the up position.
Figure 4-28 Possible module addresses
Refer to 7.3 to edit, add, delete, and view module list.