Honeywell INTELLIKNIGHT 5820XL - Manual (Page 151)

Programming
151209 7-25
7.6.2 Point Programming For Internal or External Power
Module (5895XL)
To program for an internal or external power module points:
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select for Program Menu.
4. Press to enter point menu.
5. Press the or arrows to select the desired module. Refer to Section 6.5 for
available choices.
6. Press .
7. Enter the number of the circuit or point you wish to edit. Refer to Table 7-6 for
available selections.
8. Press .
9. Select the type by pressing the or arrows.
10. Press .
11. Select the function by pressing the or arrows.
12. Press .
13. Select the zone by pressing the or arrows.
14. Press .
15. Edit point name. See Section 7.6.3.1.
Or
Press to skip point name edit.
16. Repeat Steps 1 through 15 for all circuits.
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK