Honeywell INTELLIKNIGHT 5820XL - Manual (Page 153)

Programming
151209 7-27
7.6.3 Point Programming For 5880 and 5865 Modules
To program 5880 or 5865 module points:
1. Enter the installer code.
2. Press or to display the main menu.
3. Select for Program Menu.
4. Press to enter point menu.
5. Press the or arrows to select the desired module. Refer to Section 6.5 for
available choices.
6. Press .
Figure 7-10 Programming Points Screen for 5880 and 5865 Modules
7. Enter the point number.
8. Press .
9. Press the or arrows to select the type (Notification or unused).
10. Press .
11. Press the or arrows to select the desired Group.
12. Press
13. Edit module name. See Section 7.6.3.1.
Or
Press to skip module name edit.
14. Repeat Steps 1 through 13 for all points.
7.6.3.1 Assigning a Name to Points
You can assign a name to a point to make it easier to recognize on a display.
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK