Honeywell INTELLIKNIGHT 5820XL - Manual (Page 40)

IntelliKnight 5820XL Installation Manual
3-16 151209
Disable (set to UNUSED) any unused circuits. If you do not disable unused
output circuits, they will cause a trouble condition (unless an EOL resistor is
used). 7.6
Select a name for the point. 7.6
Output Group Configuration
Add a group to the system if it does not already exist. 7.5.2
Assign output points to a group. 7.6
Assign a name (or description) for a group. 7.5.1.1
Select “group properties” (see below).
Latching / non-latching 7.5.1
Silencing option 7.5.1
Select options for activation with system switches. 7.5.1
Map zones to output groups that will activate when zone goes into alarm. 7.4.1.3
Select a cadence pattern for outputs in the zone. 7.4.1.3
Task
See Sec.
(for more info.)