Honeywell INTELLIKNIGHT 5820XL - Manual (Page 160)

IntelliKnight 5820XL Installation Manual
7-34 151209
Or
Press to bypass the dialing prefix option.
7.7.2.2 Number of Answer Rings
This option is used in conjunction with the 5660 SKSS. Use the option to determine
the number of rings before the panel answers a call from the computer. Range is 00-
15 rings. This option is factory-programmed as 06 rings, which should be compatible
for most installations where the answering machine bypass feature is used. You may
need to adjust it depending on the installation’s telephone system.
The selection made here must match the programming for this option in the
Communication Configuration dialog box of the 5660 SKSS. See the software
manual for more information (PN 151240).
8. Enter the desired number of answer rings, then press .
7.7.2.3 Dial Option (TouchTone or Pulse)
9. Press the or arrow to select the dial option, then press .
7.7.2.4 Rotary Format
10. Press the or arrow to select the pulse ratio for rotary dialing option, then
press . Options are:
7.7.2.5 Line Monitor
Enable the line monitor for each phone line that will be used. See Figure 7-13 for
location of this field on the phone lines screen. When the phone line monitor has
been enabled for a phone line, a trouble condition will occur if the line is not
connected. If a phone line will not be used, it must be disabled.
Dial Option Description
PULSE If this option is selected, only pulse dialing will be used for this phone line.
TT
TouchTone dialing. If this option is selected, only TouchTone dialing will be used
for this phone line.
TT/PL
TouchTone alternating with pulse. If this option is selected, the dialer will first
attempt to use TouchTone. It will switch to pulse if TouchTone is not successful
on the first attempt. It will continue to alternate between TT and pulse for
additional attempts.
U U.S. standard format. Uses the 60 msec / 40 msec make/break ratio.
E European format. Uses the 66 msec / 34 msec make/break ratio.
ENTER
ACK
ENTER
ACK
ENTER
ACK