9 5865-3 / 5865-4 led annunciator installation, 5865-3 / 5865-4 led annunciator installation -25 – Honeywell INTELLIKNIGHT 5820XL User Manual

Page 65

Control Panel Installation

151209

4-25

4.9

5865-3 / 5865-4 LED Annunciator Installation

The 5865-3 and 5865-4 are LED annunciators. The 5865-4 has 30 mappable LEDs,
remote silence and reset key switches, and a general system trouble LED. The 5865-
3 has 30 mappable LEDs only. These are arranged as 15 pairs of red (typically used
for alarm) and yellow (typically used for trouble) LEDs.

Installation of the 5865-5 and 5865-4 is identical. The key switches and the trouble
LED follow the behavior of other system annunciators and do not require any
installation steps. The following sub-sections describe how to install the 5865-3 and
5865-4 hardware. Refer to Section 6 for programming information.

Note: This manual uses “5865” when referring to aspects of the 5865-3 and 5865-4 that are common

to both models.

Figure 4-24 5865-3 and 5865-4 Assembly (front view)

SILENCE

TROUBLE

RESET

5865-4 Board Assembly

5865-3 Board Assembly

Plexiglass plate mounted to LED board at factory.

Do not remove.

5865-4 switches
follow main FACP;
no installation
or programming
required.

Numbers indicate
point numbers for
5865. (They do
not appear on board
assembly.)