Honeywell INTELLIKNIGHT 5820XL - Manual (Page 177)

System Operation
151209 8-3
8.4 Menu System
The control panel is easy to operate from Main Menu. To view the Main Menu press
the or button on the control panel or remote annunciator, then turn the
firefighters key clockwise or enter your access code. The Main Menu will appear as
shown in Section 8.4.1. Select the desired option. If you have entered a code or
firefighters key does not have access to the menu item you have selected the
following display message will appear:
-Access denied.-
Entered PIN does not
allow access to this
function.
You must enter an access code with the correct profile settings to gain access to that
menu item.
The control panel supports up to 20 access codes. The profile for each access code
(or user) can be modified through the programming menu option (see Section 7.10
for access code programming).
8.4.1 Main Menu Overview
The chart below is a brief overview of the Main Menu. These options are described in
greater detail throughout this section of the manual.
Main Menu Options Description
System Tests
From here both menus can access Fire Drill and Indicator Test.
Point Functions
From here both menus can enable / disable points.
Event History
Display event history on the LCD. See Section 8.5.6 for more
information.
Set Time and Date
Set time and date for the system.
Printer Options
Options for controlling a printer if attached to the system. If a printer is
used, the Model 5824 serial/parallel interface module must be used.
Reset Dialer
Cancel any attempt to call the central station. Any calls awaiting
additional attempts will be aborted.
Program Menu
Brings up a set of menus for programming the panel, including
changing access codes. These options are described in detail in
Section 7.
System Info
View system information, including model and serial numbers and
revision number and date.
Up/Download
Initiate communication from the panel site between the panel and a
computer running the Silent Knight Software Suite.
ENTER
ACK