Honeywell INTELLIKNIGHT 5820XL - Manual (Page 64)

IntelliKnight 5820XL Installation Manual
4-24 151209
4.8.4 Dry Contact Wiring
The 8 input circuits on the 5880 board are for monitoring switch inputs-any type of
switch supported by the control panel can be used with the 5880. For example, you
can use a 5880 to monitor pull stations, water flow, tamper, reset, or silence switches.
Wire dry contacts as shown in Figure 4-23. Notice grouping of terminals; power
terminals are shared by two inputs.
Figure 4-23 Dry Contact Wiring
Model 7628
Supervised/Power Limited
4.7k
 EOL