Honeywell INTELLIKNIGHT 5820XL - Manual (Page 114)

IntelliKnight 5820XL Installation Manual
6-12 151209
To exit Program Mode:
When you have completed working with the menus, press (left arrow) several
times until you are exited from programming mode. Two prompts will display. The first
prompt is to make sure you intended to leave the Program Menu (select Yes or No as
appropriate). The second prompt is for accepting all changes. If you select No, any
changes you have made since you entered the Program Menu will have no effect.
6.4.1.1 Moving through the Menus
Figure 6-8 shows how to move through Program Menu screens, using the System
Options screen as an example.
Figure 6-8 Moving through Program Menu
(System Options Sub-Menu Used as an Example)
6.4.1.2 Selecting Options and Entering Data
There are several ways to make programming selections using the control panel
depending on which screen you are currently viewing. The chart below is a generic
explanation.
To Press
Select from a menu Enter the number of the option.
Enter numeric data The appropriate number on the annunciator.
Enter text (alphanumeric
data) Enter each letter individually by pressing and holding any numeric key until
the one you wish to select displays. Then press (right arrow) to select
the letter. See Section 6.4 for complete information.
Select from a scrolling list
The (up arrow) or (down arrow) to move through the list of
available options. When the option you want to select is displayed, press
.