Honeywell INTELLIKNIGHT 5820XL - Manual (Page 61)

Control Panel Installation
151209 4-21
4.8 5880 LED I/O Module
The 5880 is an LED driver board that can be used in a wide variety of applications,
including as an interface with most customized floor plan annunciator boards. The
5880 can drive up to 40 LEDs and has one PZT controller. The 5880 also has eight
inputs for monitoring. The following sub-sections describe hardware installation.
Refer to Section 6 for programming information.
4.8.1 5880 Board Layout
Figure 4-20 shows the locations of screw terminals for connection to the panel and
contact monitor wiring; pin connectors for connecting LEDs; and the DIP switch for
selecting an SBUS ID number for the 5880.
Figure 4-20 5880 Board Layout
SBUS Connection
SBUS Address
DIPs
Dry Contact Inputs