Honeywell INTELLIKNIGHT 5820XL - Manual (Page 183)

System Operation
151209 8-9
5. A screen similar to those shown in Figure 8-4 will display.
Figure 8-4 Checking Detector Sensitivity Compliance
If a printer is attached to the system (via a Module 5824 serial/parallel interface
module), you can print detector status (see Section 8.5.19).
8.5.14 View Status of a Point
1. From the Main Menu, select for Point Status.
2. From the list that displays, press to select the module where this point is
located. The screen that displays will show you if the point has a trouble and will
provide sensitivity compliance information. (See Section 8.5.13 for complete infor-
mation about detector sensitivity compliance.)
8.5.15 View Alarms or Troubles
When the system is in alarm or trouble, you can press to view the location of an
alarm or trouble. See Section 8.5.15 for more information.
ENTER
ACK