6 point, 1 point programming for 5815xl module, Point -22 – Honeywell INTELLIKNIGHT 5820XL User Manual
Page 147: 1 point programming for 5815xl module -22, Ugh programming (see section 7.6), Ee section 7.6 for det, See section 7.6 for, N 7.6
Programming
151209
7-21
7.6
Point
You may need to change characteristics of individual input points (detectors and
switches) even after using JumpStart. This section explains how to change options
for: type of input point; latching/non-latching status (switches); and name and zone
assignment of a point.
7.6.1
Point Programming For 5815XL Module
To program for an 5815XL Module points, follow these steps:
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select
for Program Menu.
4. Press
to enter point menu.
5. Press the
or
arrows to select the desired module. Refer to Section 6.5
Quick Reference Table for available choices.
6. Press .
7. Enter the number of the point you wish to edit.
8. Press .
9. Select the type of device by pressing the
or
under column heading “Type Selection” for a list of choices.
Table 7-5: Point Programming Options for 5815XL Modules
Type
Selection
Function
Latching
Option
Comments
UNUSED
SD
DETECTOR
PHOTO
ION
HEAT
PHOT DUCT
ION DUCT
2WIRE SMK
SD SUP DET
SUP PHOTO
Latching
Non Latching
SUP ION
ENTER
ACK
ENTER
ACK
ENTER
ACK