Honeywell INTELLIKNIGHT 5820XL - Manual (Page 156)

IntelliKnight 5820XL Installation Manual
7-30 151209
7.7.1.1 Edit Accounts
6. From the next menu, select for Edit Account.
A screen similar to one shown in Figure 7-12 will display. The following subsec-
tions describe the options on each field.
Figure 7-12 Reporting Account Editing Screen
Select Account (ID)
The control panel provides up to 4 reporting accounts. The priority of an account is
based on its account ID. Account 1 is highest priority; Account 4 is lowest. Use
Account 1 to report the highest priority events.
7. Press the or arrow to select account ID number, then press .
Edit Account Number
Enter an up-to-6-digit number for each account to identify the account to the central
station. See Figure 7-12 for location of this option on the screen. The account number
should be compatible with the reporting format used. For example, the Contact ID
format transmits up to four digits only.
8. Enter the desired account number (up to 6-digits), then press .
Select Reporting Format
Select a reporting format for each account. Options are:
SIA SIA format. 8 events per call.
CID Ademco’s Contact ID format
S20 Same as SIA but limits events reported to 20 events per phone call.
ENTER
ACK
ENTER
ACK