Honeywell INTELLIKNIGHT 5820XL - Manual (Page 192)

IntelliKnight 5820XL Installation Manual
8-18 151209
for zone option programming.
8.7.1 Single Interlock Zone Releasing
A single interlock zone utilizes a minimum of two addressable detectors and a
designated manual release switch.
Conditions Required for an Pre-Alert Output Activation
If any single addressable detector is activated, the “Pre-Alert” output will activate.
This alerts the user that the initial stages required for a release condition are present.
(Also refer to Table 8-3.)
Conditions required for an General Alarm and Release Output Activation
If two or more addressable detectors, or a manual release switch activate, the
“Alarm” and the “Release” outputs will activate. (Also refer to Table 8-3.)
Important!
Only addressable detectors can be used. No conventional detectors can be used.
Each Single Interlock Zone input requires at least one manual release switch.
Table 8-3: Single Interlock Zone Operation
Inputs Output Results
1st Addressable Detector x x x x
2nd Addressable Detector x x x x
Manual Release Station x x x x
Nor
m
al
Pr
e-A
ler
t
Pr
e-A
ler
t
R
e
lea
s
e and Genera
l Al
arm
R
e
lea
s
e and Genera
l Al
arm
R
e
lea
s
e and Genera
l Al
arm
R
e
lea
s
e and Genera
l Al
arm
R
e
lea
s
e and Genera
l Al
arm