Honeywell INTELLIKNIGHT 5820XL - Manual (Page 171)

Programming
151209 7-45
7.9 Computer Account
An installer at the panel site can initiate communications between the panel and a
computer running the 5660 SKSS (see also Section 8.5.18). In order for this
communication to function properly both the computer (running the software) and the
control panel must have matching computer account numbers and computer access
codes.
Before you program in this location you should know how your control panel will
communicate with the downloading computer, either through direct connect (RS232)
or via the phone lines (Internal Modem).
If the panel initiates the call to a downloading computer, a phone number must be
programmed in the computer accounts area. If the computer initiates the call,
answering machine bypass may need to be selected (see Section 7.7.2.6).
To program computer account information:
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select for Program Menu.
4. Select for System Options.
5. Enter the computer account number, then press .
6. Enter the computer code (up to 7-digits), then press .
7. Enter the phone number the panel will dial to connect to a downloading computer
(up to 40-digits), then press . See Table 7-7 for special dialing characters.
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK