Honeywell INTELLIKNIGHT 5820XL - Manual (Page 145)

Programming
151209 7-19
A warning screen will display. If you want to proceed with deleting the group,
select Yes. To cancel, select No.
7.5.4 View Group Points
1. Enter the installer code.
2. Press or to display the main menu.
3. Select for Program Menu.
4. Press to enter group menu.
5. Press to view group points.
6. Enter the group number, then press .
7.5.5 Edit Output Group Templates
Some installations may require that zones be mapped to more than 8 output groups.
With output group templates you can combine one or all output groups into one
template, which can be used when the same combination of outputs are used for
several zones.
For example, lets say an installation has five zones (See Table 7-4). The check mark
indicates what output groups are mapped to each zone. You will notice that every
zone is mapped to outputs 1 and 2. As an alternative you can create a template that
combines output group 1 and 2 as one choice.
Table 7-4: Zone Group Example
Zone
Group Number
1 2 3 4 5 6 7 8
1st Floor Smoke
Detectors
x x x
2nd Floor Smoke
Detectors
x x x
3rd Floor smoke
Detectors
x x x
Manual Fire Pull Stations x x x
Water Flow Switches x x x
ENTER
ACK
ENTER
ACK