2 slc devices with dip switches, 2 slc devices with dip switches -11 – Honeywell INTELLIKNIGHT 5820XL User Manual

Page 101

Text mode
Original mode

SD and SK SLC Device Installation

151209

5-11

5.8.2

SLC Devices with DIP Switches

Input and relay module addresses are set using the DIP switches on the module
board. The chart below shows the available addresses. For example, to select
address 3, place DIP switches 1 and 2 in the up position. The range of valid
addresses is 1-127. 0 is an invalid address.

Figure 5-8 SD SLC Device Addressing Using DIP Switches