Epiphan Pearl Mini Live Video Production System - Manual (Page 99)

Pearl Mini User Guide Configure network settings
Configure network settings
Pearl Mini uses DHCP to obtain an IP Address over an Ethernet-based network by default; however, you can
easily change the network settings.
Topics include:
l
Network ports used by Pearl Mini
l
Verify IP address and MAC address of Pearl Mini
l
Configure a static IP address
l
Configure DHCP
l
Tether to a mobile network
l
Perform network diagnostics
Network ports used by Pearl Mini
The following table lists the default incoming and outgoing network ports that Pearl Mini uses.
Do not block traffic over these ports. If you want Pearl Mini to operate properly, make sure that your firewall
is configured to open these ports. Blocking a port will cause the service that uses that port to fail. It is possible
to use the Admin panel to change the default ports that are used for some services.
Table 14 Default incoming network ports for Pearl Mini
Port (or range) Protocol Description
21 TCP FTP server, if enabled. See Local FTP server .
22 TCP SSH for remote support. See Configure remote support .
80 TCP
HTTP/HTTPS for web-based access to the Admin panel and Epiphan Live,
HTTP/HTTPS API, REST API, and the live channel preview.
You can change the default HTTP port value using the Admin panel, see
Configure HTTPS .
123 TCP/UDP NTP server, if enabled. See Configure a time server .
319 and 320 UDP PTP server, if enabled. See Configure a time server .
443 TCP
HTTPS for the Admin panel . Port is open only when HTTPS is enabled.
You can change the default HTTPS port value using the Admin panel, see
Configure HTTPS .
88