Epiphan Pearl Mini Live Video Production System - Manual (Page 104)

Pearl Mini User Guide Configure a static IP address
Label Description
transfer on the network. The default value is 1500, which is the largest value allowed
by Ethernet at the network layer. It’s best for all nodes in your network to use the
same value. Only change the MTU value if you know that other nodes use a different
value.
The default gateway and DNS Server fields cannot be left blank. If you do not have a default
gateway or a DNS server for your network, enter the static IP address in those fields.
4. Reboot Pearl Mini when prompted. From the Configuration menu, select Maintenance and click
Reboot Now on the Maintenance page.
5. After the system has finished rebooting, use the new IP address to log back in to the Admin panel as
admin and verify that all changes were applied.
To configure a static IP address using the touch screen:
1. Tap the gear icon to open the System settings screen. If the control icons aren't showing, tap anywhere
on the touch screen.
2. Tap Network . The Network settings page opens. The currently enabled network type (DHCP or static)
is highlighted green.
3. Tap Static IP Address . The Static IP Address configuration page opens.
93