Epiphan Pearl Mini Live Video Production System - Manual (Page 125)

Pearl Mini User Guide Assign audio sources to an input
2. From the Inputs menu, click XLR/TRS Audio . The XLR/TRS Audio configuration page opens.
3. Do one of the following.
a. To make the ports function as a stereo pair, check Stereo pair and click Apply .
b. To make the ports function as separate mono ports, uncheck Stereo pair and click Apply .
When mono is selected, two sets of parameters and two audio VU meters appear on the
configuration page - one for each audio input port on Pearl Mini. Parameters that are listed only
once on the page applies to both ports.
Assign audio sources to an input
Some audio input ports share internal audio processing resources in Pearl Mini. These shared audio sources
appear in the same configuration menus in the Admin panel and appear under the same audio input label in
the user interfaces.
The audio sources that share resources are:
l
RCA (left and right ports)
l
3.5 mm (stereo port)
Both the RCA and 3.5 mm audio sources appear under the label RCA/3.5 mm Audio . You can assign one or
both audio sources to RCA/3.5 mm Audio . Choosing one audio source for the shared input disables the
other audio source. This means that when you select RCA/3.5 mm Audio as the audio source for a layout
using the custom layout editor, only the audio source you assign to RCA/3.5 mm Audio is used. Both audio
sources are assigned by default.
114