Show a channel or video source on the output port – Epiphan Pearl Mini Live Video Production System User Manual
Page 133
Pearl Mini User Guide
Show a channel or video source on the output port
4:3 resolutions
1024Ч768
1280Ч960
1400Ч1050
16:9 resolutions
1280Ч720
1360Ч768
1920Ч1080
Show a channel or video source on the output port
You can send any channel or video source to the video output port and adjust the video output resolution
and aspect ratio using the Admin panel.
The video output port frame rate is set automatically to the channel's configured frame rate. However, when
sending a video source to the video output port, you have the option to configure the frame rate of the video
output port.
For channels with audio, you can configure whether or not audio is included and adjust the volume. You can
also choose to include the audio meter. The audio meter is set to a fixed size of 15% of the width (or height if
displayed horizontally) of the display. Audio is not supported when sending a video source to the video
output port.
To set up the video output port using Epiphan Live, see
Monitor and setup the output port source and audio
To display channel or video source on the video output port:
1. Login to the Admin panel as
admin
.
2. From the Outputs menu, click the output port (
HDMI 1
or
HDMI 2
). The video output port
configuration page opens.
3. In the
Source
field, select a channel (prefixed by the word
Channel
) or a video source (prefixed by the
word
Input
).
122