Epiphan Pearl Mini Live Video Production System - Manual (Page 171)

Pearl Mini User Guide Create a configuration preset
Returning Pearl Mini to the factory defaults or performing a factory reset does not delete the
registered resource instance in Kaltura CMS. You can reregister your Pearl Mini using the same
resource name and take over for the resource instance that is still registered in Kaltura, see
Reassign a registered resource .
To apply the factory default configuration preset, you can Apply a configuration preset using the Admin panel
or Apply a configuration preset using the touch screen and select the Factory default configuration preset
using either of these procedures. A reboot is required.
To do a factory reset, see Perform a factory reset .
Create a configuration preset
You can create as many configuration presets as you need; however, there's a limit to the amount of space
available for configuration presets. A maximum of 256 MB is available for configuration presets and the
maximum size of a single configuration preset is 128 MB.
Before creating and using a configuration preset, read Configuration preset considerations .
For each configuration preset you create, you get to name the preset and choose which groups of settings to
include. See
Configuration groups for which settings are included in each group.
After you're finished configuring your Pearl Mini, it's good practice to save a full backup with all groups
selected so that you can restore your full configuration at a later date.
Configuration presets that include network or system settings require a system reboot when applied.
Important considerations
l
Do not create a configuration preset if you currently have a channel paired to your AV Studio account.
Unpair all channels before you create a configuration preset.
l
If you try to save a configuration preset but one or more of the related image files is missing, an error
message is displayed. You'll be unable to save the preset until the missing files are restored or the
layouts referencing the missing files are modified to remove the bad references.
l
If you try to save a configuration preset but there isn't enough space, an error message is
displayed. You'll need to delete some presets before proceeding.
To create a configuration preset:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
160